Software


C-works Slicer Pro

An open system ready to adapt to any Full Digital Workflow in Dentistry. You can even use our software to prepare data for other printers as well.

Available for MAC, Windows 32/64 bit and Linux systems.

165,00 EUR excl. VAT
199,65 EUR / 1 unit
Add to Cart


Spare Parts


Resin tank Foil

One of our ASAP printer resin tank features is its durability and low maintnance cost. All you need to do is to just replace the bottom foil of your resin tank when it is scratched, which happens after many months of heavy everyday use.

35,00 EUR excl. VAT
42,35 EUR / 1 unit
Add to Cart


Post-processing


NexDent LightBox (VENMACNDLC001)

The LC 3DPrint Box is a revolutionary UV curing unit, specially designed for post curing 3D printing materials. The new LC 3DPrint Box is equipped with 12 UV light bulbs which are strategically placed inside the unit. This ensures that a product is illuminated from all directions, which results in a quick and uniform curing cycle. The spacious inside (LxB:26cm; H:19,5cm) of the LC 3DPrint Box allows you to easily cure multiple products at once. In addition, the box has enough space to place an articulator inside. When necessary, the UV light bulbs can be changed easily.

High load capacity (LxB 26 cm , H19,5 cm)
Full light spectrum (300-550 nm)
Short polymerization times
Controlled temperature for optimal curing
Noiseless
Objects are illuminated from all sides
New post-process method (without additional nitrogen)
Freedom to set individual exposure times
One Unit for all countries

3.050,00 EUR excl. VAT
3.690,50 EUR / 1 Unit
Add to Cart
Instruction For Use  

Otoflash G171

Flash-curing device for rapid and reliable curing of light curable resins

The Otoflash G171 has two flashbulbs that emit light into the polymerisation chamber from below. It is therefore especially suitable for application in otoplastics/hearing aids and in the production of jewellery. The device can be used for the photopolymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm.

With its technical configuration, the Otoflash G171 enables short curing times: In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. The respective light radiation at a wavelength of 280-580 nm is very intense. Compared to other methods this achieves a substantially better curing of the materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).

Dimensions of polymerisation chamber: 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 w
Capacity: 4 BTE-aids or 6 ITE-aids
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50/60 Hz
Power input: 250 watt
Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
Average flash power: 200 watt
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 x 310 x 140 mm
Weight: 6 kg

2.090,00 EUR excl. VAT
2.528,90 EUR / 1 unit
Add to Cart

UV Processing Light 1

After precise cleaning of the print-out insert teh model into the chamber that will finalize the process.
Komora má funkci časového spínače. This chamber has a timer and 4 lamps with total energy output of 36 watts.

60,00 EUR excl. VAT
72,60 EUR / 1 unit
Add to Cart


Resins


NextDent SG (Surgical Guide)

NextDent SG is a biocompatible certified Class I material, developed for the printing of Surgical Guides. Because of the high precision of this material it is easy to insert drill sleeves, directly after printing. Whereby enabling even greater precision during surgery.

NextDent SG is resistant to disinfectants. In addition, the material can also be sterilised using gamma rays and autoclave. The use of an autoclave does not affect the dimensional stability, therefore NextDent SG can be used in every operating theatre.

Colour: Translucent Orange
Brookfield viscosity at 23° Celsius 1.1 – 1.6 Pa·s ASTM D2162
Flexural strength ≥ 80 MPa ISO 20795-1:2013
Flexural modulus ≥ 2.000 MPa ISO 20795-1:2013
Hardness Shore D 80 – 90 ISO 868:2003
Sterilisation at 134° Celsius Max 5 min.

269,00 EUR excl. VAT
325,49 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Base

NextDent Base is a biocompatible Class IIa material suitable for printing all types of dentures bases. This material has low shrinkage compared to standard PMMA denture base materials, which result in excellent fitting denture bases. The low amount of residual monomer left after post-processing gives the material it’s biocompatibility.

Colour: Various Pink TM18
Brookfield viscosity at 23° Celsius: 1.0 – 1.5 Pa·s ASTM D2162
Flexural strength ≥ 85 MPa ISO 20795-1: 2013
Flexural modulus ≥ 2.100 MPa ISO 20795-1: 2013
Water sorption ≤ 32 μg/mm3 ISO 20795-1: 2013
Water solubility ≤ 1.6 μg/mm3 ISO 20795-1: 2013
Residual Monomer ≤ 1% ISO 20795-1: 2013
Hardness Shore D 80 – 90 ISO 868: 2003

306,00 EUR excl. VAT
370,26 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent CB

NextDent C&B is a biocompatible Class IIa material for printing Crowns and Bridges (containing 1-3 pieces). The material properties in combination with its abrasion resistance makes NextDent C&B suitable for this application. NextDent C&B can be cemented with cement.

Colour: Various colours TM18
Brookfield viscosity at 23° Celsius 0.9 – 1.4 Pa·s ASTM D2162
Flexural strength ≥ 85 MPa ISO 10477:2003
Flexural modulus ≥ 2.100 MPa ISO 10477:2003
Water sorption ≤ 30 μg/mm3 ISO 10477:2004
Water solubility ≤ 5 μg/mm3 ISO 10477:2004
Hardness Shore D 80 – 90 ISO 868:2003

269,00 EUR excl. VAT
325,49 EUR / 1 l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent CB MFH (Micro Filled Hybrid)

NextDent C&B MFH is a biocompatible classified Class IIa* material developed for mid-term crown and bridges. The balance between inorganic fillers and the resin give the material it’s high strength and wear resistance.

The material is easy to finish and polish, and can be stained with all types off composite staining kits. Due to the perfect balance between opacity and translucency the printed crown blends in perfect between the existing teeth.

Colour: Various colours TM18
Brookfield viscosity at 23° Celsius 0.8 – 1.3 Pa·s ASTM D2162
Flexural strength ≥ 100 MPa ISO 10477:2003
Flexural modulus ≥ 2.400 MPa ISO 10477:2003
Maximum stress intensity factor ≥ 1.5 MPa 1/2 ISO 20795-1:2013
Total fracture work ≥ 7.000 J/m2 ISO 20795-1:2013
Water sorption ≤ 30 μg/mm3 ISO 10477:2004
Water solubility ≤ 5 μg/mm3 ISO 10477:2004


269,00 EUR excl. VAT
325,49 EUR / 1 l bottle
Zbozi je momentalne nedostupne

NextDent Ortho Clear

NextDent Ortho Clear is a biocompatible Class IIa material for all types of splints and retainers. It is a clear and thereby aesthetically pleasing 3D print material, characterised by high strength, fracture- and wear resistance. Suitable for printers with wavelength of 365 – 385 nm.

Colour: Clear
Brookfield viscosity at 23° Celsius 0.8 – 1.3 Pa·s ASTM D2162
Ultimate flexural strength No break ISO 20795-2:2013
Flexural modulus ≥ 1.300 MPa ISO 20795-2:2013
Maximum stress intensity factor ≥ 1.1 MPa 1/2 ISO 20795-2:2013
Total fracture work ≥ 6.000 J/m2 ISO 20795-2:2013
Water sorption ≤ 65 μg/mm3 ISO 20795-2:2013
Water solubility ≤ 5 μg/mm3 ISO 20795-2:2013
Hardness Shore D 80 – 90 ISO 868:2003

306,00 EUR excl. VAT
370,26 EUR / 1 l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Ortho IBT

NextDent Ortho IBT is a biocompatible certified Class I material for orthodontic applications. Making use of the right software, you can plan the exact location of orthodontic brackets and design the Indirect Bonding Tray.

Due to the flexible characteristics of the printed indirect bonding trays, orthodontist can easily place all the brackets at once, saving time at the chair.

Colour: Pink
Brookfield viscosity at 23° Celsius 1.1 – 1.6 Pa·s ASTM D2162
Elongation at break 12 – 18 % ISO 527-1: 2012
Shore A 80-90 TM25

306,00 EUR excl. VAT
370,26 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Ortho Rigid

NextDent Ortho Rigid is a biocompatible Class IIa material developed for digital manufacturing of splints. In combination with suitable software, it is possible to easily
design and print splints.

Colour: Transparent Blue TM18
Brookfield viscosity at 23° Celsius 0.8 – 1.3 Pa·s ASTM D2162
Ultimate flexural strength ≥ 75 MPa ISO 20795-2:2013
Flexural modulus ≥ 1.800 MPa ISO 20795-2:2013
Maximum stress intensity factor ≥ 0.9 MPa/2 ISO 20795-2:2013
Total fracture work ≥ 3.000 J/m2 ISO 20795-2:2013
Water sorption ≤ 32 μg/mm3 ISO 20795-2:2013
Water solubility ≤ 5 μg/mm3 ISO 20795-2:2013
Hardness Shore D 80 – 90 ISO 868:2003

306,00 EUR excl. VAT
370,26 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Model Ortho

NextDent Model Ortho is a material suitable for printing models specifically used in ‘Vacuum Casting’ applications. This material is faster and easier to print compared to other model materials, but is slightly less accurate.

Colour: Opaque Beige TM18
Brookfield viscosity at 23° Celsius 1.0 – 1.5 Pa·s ASTM D2162
Hardness Shore D 80 – 90 ISO 868:2003
Flexural strength ≥ 40 MPa ISO 527-1: 2012
Flexural modulus ≥ 1.000 MPa ISO 527-1: 2012

208,00 EUR excl. VAT
251,68 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Tray

NextDent Tray is a biocompatible certified Class I material designed to print individual impression trays. The material distinguishes itself because of the high printing speed and accuracy.

NextDent Tray resin enables technicians to make even the most complex trays in a matter of minutes. The printed trays are rigid and suitable for all types of impression material, making high-quality, high-precision impressions possible.

Colour: Blue & Pink
Brookfield viscosity at 23° Celsius 0.9 – 1.4 Pa·s ASTM D2162
Hardness Shore D 80 – 90 ISO 868:2003
Flexural strength ≥ 80 MPa ISO 20795-1:2013
Flexural modulus ≥ 2.000 MPa ISO 20795-1:2013

269,00 EUR excl. VAT
325,49 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Gingiva Mask

NextDent Gingiva Mask is a flexible material that can be used in combination with the model material. Making it possible to print parts of the model that need a certain flexibility.

Colour: Pink
Brookfield viscosity at 23° Celsius 1.1 – 1.6 Pa·s ASTM D2162
Elongation at break 15 – 25 % ISO 527-1: 2012

208,00 EUR excl. VAT
251,68 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

NextDent Cast

NextDent Cast is a residue-free combustible 3D printing material, suited for all kinds of purposes. Whether you need a support structure, a frame or orthodontic devices. Simply design, print and cast making use of our castable material and the investment material that is recommended. Casting the parts in the metal you require.

Colour: Purple
Brookfield viscosity at 23° Celsius 1.1 – 1.6 Pa·s ASTM D2162
Hardness Shore D 80 – 90 ISO 868:2003

208,00 EUR excl. VAT
251,68 EUR / 1l bottle
Add to Cart
Safety Sheet   Instruction For Use   Declaration of Comformity  

FunToDo Deep black

Deep Black has specifically been designed to get the best out of your High End DLP/SLA machine.
We have combined this special blend with near nano carbon particles, which enables you to print objects in the highest resolutions.
Despite being black, the cure times are just as any other of our fast curing resins.

The Deep Black has a 81 Shore D hardness and, just like Snow White, has the look and heel of injection moulded plastic.
The viscosity is around 80 Mpas, so not only bottom up printers can benefit of the exceptional resolution of Deep Black.

63,00 EUR excl. VAT
76,23 EUR / 1l bottle
Add to Cart
Safety Sheet  

FunToDo Snow White

Snow White is the first resin in this market segment that is white, and stays white!
It has a milky white colour, which makes it an ideal resin for printing architectural designs or other designs where white is the predominant colour.
Combine Snow White with one of our pigments to create any pastel colour you like.
Snow White comes with one free 5ml dropper bottle pigment of your choice: Red, Blue, Yellow or Black. This is enough for 1 kg of resin.

54,00 EUR excl. VAT
65,34 EUR / 1l bottle
Add to Cart
Safety Sheet  

FunToDo Industrial Blend

The Industrial Blend resin has been developed especially for some industrial clients who were in need for a resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures.
Because of these properties it is one of the few resins perfectly suitable for vulcanisation.
For relatively low temperature metals like pewter or tin you can also use the Industrial Blend to print your moulds and cast straight from the printed mould. Read all about it in this Instructable

​The hardness of the fully cured resin is 75 shore D.
It has been tested from -45C to +225C.

​Available in Red, Black and unpigmented.

59,00 EUR excl. VAT
71,39 EUR / 1l bottle
Add to Cart
Safety Sheet  

FunToDo Dentifix



95,00 EUR excl. VAT
114,95 EUR / 1l bottle
Add to Cart


Pigments


FunToDo Pigment Set

Our Pigment Set contains four of 20ml dropper bottles of pigments.
The pigments are of our own design and produced by ourselves. The pigments are of the finest quality and have an exceptional fine particle structure. The four colours of the set enables you to mix any colour of the rainbow.

To give you an idea of the pigment strength, we use about 4ml red pigment per kg. to make our SB Red and our IB Red.

Usage: Just measure the amount of resin you need to fill your Vat. Slowly drip the amount of pigment to the resin (stir after every few drops) until you have reached the colour you want to achieve. Don't forget to make a note of the amount of drops for future use.
You can mix the colours to make any other colour.
Don't forget: You can always add some more pigments, but you can never take them out!

​Be careful not to spill, stains are very hard to remove. Wear gloves!

13,00 EUR excl. VAT
15,73 EUR / Set of 4 20 ml bottles
Add to Cart



Great! Do you wish to continue shopping or proceed to check-out?